| |
| TMS-4E1/D 120channel PCI digital network interface voice processing board |
| TMS-4E1/D high end digital network interface board is specially designed for telecom level voice system. Using high speed DSP, up to 2.9GIPS processing capability, unique digital signal algorithm, built on an open resource structure, a single versatile board has a variety of functions, signal processing, voice processing, DTMF processing, tele-conferencing, fax and data transmission, which proves it can fully meet requirements of telecom level CTI system. Including 8 step models: TMS-1E1/D、TMS-2E1/D、TMS-3E1/D、TMS-4E1、TMS-5E1/D、TMS-6E1/D、TMS-7E1/D、TMS-8E1/D. One board provides 30/60/90/120/150/180/210/240 voice channel, with built-in signal processing module, to connect any one or two of SS1,SS7 and DSS1 at same time. TMS-8E1/D meets H.100 CT BUS standard, therefore it is flexible to expand to higher density. |
 |
| 点击小图看大图 |
Models:
TMS-8E1/D PCI/CPCI 210/240 channel PCI digital network interface board
TMS-6E1/D PCI/CPCI 150/180 channel PCI digital network interface board
TMS-4E1/D PCI/CPCI 90/120 channel PCI digital network interface board
TMS-2E1/D PCI/CPCI 30/60 channel PCI digital network interface board
TMS-4E1/D high end digital network interface board is specially designed for telecom level voice system. Using high speed DSP, up to 2.9GIPS processing capability, unique digital signal algorithm, built on an open resource structure, a single versatile board has a variety of functions, signal processing, voice processing, DTMF processing, tele-conferencing, fax and data transmission, which proves it can fully meet requirements of telecom level CTI system. Including 8 step models: TMS-1E1/D、TMS-2E1/D、TMS-3E1/D、TMS-4E1、TMS-5E1/D、TMS-6E1/D、TMS-7E1/D、TMS-8E1/D. One board provides 30/60/90/120/150/180/210/240 voice channel, with built-in signal processing module, to connect any one or two of SS1,SS7 and DSS1 at same time. TMS-8E1/D meets H.100 CT BUS standard, therefore it is flexible to expand to higher density. |
1. interface connect: single board 1E1 interface 2M(PCM),
2. physics connect: 75ohm BNC or 120ohm RJ45
3. signal processing: SS1, SS7, DSS1.
4. voice processing: 30 voice channel in parallel, 30 channel for receiving or sending DTMF in proportion of 1:1
5. exchange: H.100 CT BUS standard, can be connected to operator service board, analog board, and any other CT-BUS, SC-BUS board. |
1. built-in module to connect and process SS1,SS7 and DSS1 at same time.
2. support loop start network connectivity, can connect and transfer signal, SS1, SS7, and ISDN(PRI) can be tranfered to each other.
3. digitalized record and playback, receive and send DTMF. Support high density voice processing. Unique high performance DSP, bring the PCI data processing ability into full play, data processing volume is 8-10 times of ISA.
4. automated out-bound call and recall
5. 128 sides tele-conference
6. can add 4-160 channels of fax resource directly into the board. The number of channels increases in times of 4.
7. can add 32-960 channels of FSK and DTMF receiveing and sending resoures directy into the board. The number of channel increases in times of 32.
8. H.100 CT BUS standard, allow it connect to TMS-240AG, expand to 1-360 operator service.
9. dialer number recognize and indicate.
10. connect by 120ΩRJ45 line or 75ΩBNC line.
11. H.100 CT BUS exchange line, single system can connect up 16 pcs of board at same time, provide up to 480 channels.
12. can configure any channel as out-relay channel or in-relay channel, or as both-way channel.
13.
14. PnP, easy assembly. No need to set board add, nor main board and side board.
15. We design TMS products with humanity, fully considering every details of engineering. We creatively add a handle at the side of board for convenient plug and pull. There are two ways of connection for your option: 120ΩRJ45 line or 75ΩBNC line, transforming between them can be realized outside or inside computer system with a transformer we offered. |
| Digital network interface specifications |
1. interface: E1, 2M/PCM
2. physics connect: 75ohm BNC or 120ohm RJ45
3. voice encoding: a-law, PCM, ADPCM
4. signal: SS1, DSS1(ISDN), SS7
5. data line: PCI, 32-bit PCI slot
6. exchange line: CT-BUS/H.100 CT BUS
7. single board channel: 240/210/180/150/120/90/60/30 channels
8. single board resource: interface connection, signal, voice, DTMF, tele-conference, operator service, fax, data transmission.
|
All TMS board use TASK programming platform provided by Beijing Repetutaion & Huasun Technology co Ltd. All board, both analog and digital interface board use same one driver and same API. And their application program can be transplanted seamless between them.
Hardware: Pentium Processor PCI bus computer, 256M memory or above
System software support: WINDOWS2000、WINDOWSNT4.0 + sp5.0 or above、WINDOWS 98/WINDOWS XP
Program interface: DELPHI、VC 、VB、PB and others that supports OCX/DLL.
Programming platform: OCX or DLL |
Telecom level QQ/TICQ voice chat system
Mobile/telecom color ring system
960 channels high density message service center
160 channels high density fax server
360 ports operator service system
Multi-media access voice system
Big and medium sized call center
Signaling connection and transform system( ISDN/SS1/SS7)
Interactive voice response system
Big tele-conference system
Enterprise personalized switch
Voice message |
|
|
